Remember to Spring Forward One Hour
If you have clocks that need adjusting by hand if the power goes out or when daylight saving time rolls around, you’ll need to make a note for March 14. However, manually adjusting for Daylight Saving Time, or power outages either, is not necessary when you have an automatically controlled clock or clock system.
LUMICHRON Clocks Automatically Adjust for Daylight Saving Time Changes
Lumichron’s clocks and clock systems eliminate the need for manual Daylight Saving Time changes. The timekeeping equipment in Lumichron clocks automatically adjust twice a year, will reset for power interruptions, and also automatically control the illumination, turning on at dusk and off at dawn.
Plus if you have more than one clock in your system or on your tower, the controller will adjust all clocks exactly the same, so all faces are in sync.
Still changing clocks by hand?
If you’re still adjusting clocks by hand, it’s time to upgrade. We have clock technologies to fit interior and exterior clocks, single clocks or multiple clocks, tower clocks and streetscape post clocks. It is even possible to synchronize from your existing Wi-Fi network. Contact us to perform a no-obligation, no-cost clock audit to understand your options.
We recently received such a timely call
Our customer Mark Morin of the Wildwood Springs Community Association called to say “I love Lumichron!”. Wildwood Springs of Spring Lake, Michigan, has an entryway tower with a 4-sided tower clock (pictured above with a colorful sunrise). The clock tower was originally installed in 1993 (before our time!). The Association commissioned Lumichron™ to reburbish the clock with new clockworks a few years ago. The original mechanisms had never worked properly, one or another of the clock faces would be out of sync or not operational. And if nothing else, a clock should always tell the correct time!
Power Outage a Test for Clock Controller
Mr. Morin called because high winds in West Michigan had recently caused a power outage in the area. He was curious to see whether the MOBATIME master clock controller Lumichron™ installed would work as it should. The controller has a lithium battery backup to keep track of and reset time automatically. Mark was thrilled to discover, when he drove by the clock tower after electricity had been restored, that all four faces of the clock were EXACTLY on time and in sync! He was happy. Which makes us at Lumichron™ happy!
Clocks Reset Automatically for Daylight Saving Time
And last November, when Daylight Saving Time gave us an extra hour (Fall Back), the clocks adjusted automatically. All four faces are always in sync with each other; the master clock controller sends the same message to all. No need to go to the clock to move the hands or adjust the motors.
Lumichron Builds Clocks with Timekeeping Equipment Made by MOBATIME of Switzerland
The clockworks are made with precision in Switzerland by MOBATIME. They are really the best available; for performance, accuracy, and durability; and are virtually maintenance-free. There is no need for a maintenance contract when you buy from Lumichron™.
Let LUMICHRON Make Time for you
Save the Day – Let Lumichron™ make TIME for you. We will help you keep your clocks at the right time, all the time – hands-free. Email us for more information, or for a quote for your next project or renovation.